Skip to main content
Best Price
Alpine PXA-H800 Ultimate High-End Processor

Gunakan mesin pencari untuk menemukan produk lebih cepat

Fountek NeoCD3.0M 3" Ribbon Tweeter

Rp 3.065.679,00
SKU: Fountek NeoCD3.0M 3" Ribbon Tweeter

Fountek NeoCD3.0 ribbon tweeter

Available in Round Flange and Rectangular Flange.

Available in Black & Silver Color.

Round Flange : 110mm (4.33") Round Metal Flange, Black, Depth is 68mm (2.7")

Rectangular Flange : Flange is 115mm tall by 75mm wide  (4.52" x 2.95")
Cut out is 88mm x 61mm (3.46" x 2.4"), Depth is 2.7"

Super strong Neodymium magnets
Build-in impedance conversion transformer 
Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance. 
Thin enforced sandwich ribbon diaphragm guarantees a high degree of signal fidelity and broad frequency response. 
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range. 
Flat impedance from 1,000 to 40,000Hz 

Factory matched pairs: Although these are sold each, when you order two you will receive a matched pair.

Ribbon material: Enforced sandwich 
Ribbon mass: 18mg 
Ribbon dimension: 8mmX60mmX0.02mm 
Ribbon area: 480square millimeters 
Gap flux: 0.6 Tesla 
Gap height: 3mm 
Impedance: 7 Ohm 
DCR: 0.02 ohm 
Sensitivity: 95dB/M/W 
Frequency response: 1,400~40,000Hz 
Resonance frequency: 400Hz 
Power handling: 17W Normal, 40W Max 
Recommended crossover frequency: 2,500Hz / 2nd-Order 

Ribbon tweeters should always be used with a passive crossover! 
Do not test without a capacitor.


Price: Rp 3.065.679,00
Weight: 3 kg
NeoCD3.0PDF.pdf192.73 KB
Website developed by Visigraphic jasa pembuatan toko online jasa pembuatan website jasa pembuatan website surabaya